EN
84
To use the hot water function:
1. Direct the steam wand towards the drip tray or into a heat-resistant vessel.
2. Turn the control dial to the left water icon. Hot water is given off immediately via
the steam wand.
3. To stop the hot water flow, turn the control dial back to the central standby position.
IMPORTANT -
Do not forget to turn the control dial back to the standby position,
when the machine stops the water flow automatically. Otherwise, you cannot use
any other functions.
ENTERING YOUR OWN SETTINGS
You can adjust the grind size (coarse or fine) and the ground amount of coffee pow-
der for each grinding cycle. As well, according to your liking the extraction volumes
can be programmed independently for the espresso buttons (SINGLE or DOUBLE).
IMPORTANT -
Whenever setting a new value, the previously set value will be over-
written and lost. Only the factory settings can be recalled. With the exception of
the grind size, the reset procedure deletes ALL previously entered values.
NOTE
Your new settings will be stored permanently, even when switching off and unplug-
ging the machine. There is no need to keep the machine live.
The following table lists the factory settings.
Function
Button
Factory Setting
Range
Grinding Time
GRIND
9-10 g (equivalent to 10 -11 seconds)
at least 5 g (5 seconds)
Volume, 1 Espresso
SINGLE
20 - 30 ml
20 -120 ml
Volume, 2 Espressi
DOUBLE
40 - 60 ml
20 -120 ml
CHANGING THE GRIND SIZE
For adjusting the grind size, simply turn the bean hopper to the desired position
according to the graduation lines at the bean hopper.
