Garmin GPS 60 - Hiking GPS Receiver Owner'S Manual Download | Manualshive

Page: 17 / 94

background image

7

GPSmap 60

Status Bar

Battery Power

Auxiliary Power

Acquiring Satellites

2-Dimension Navigation

3-Dimension Navigation

Alarm is Set

USB is Connected

Backlight is On

Getting Started

The Main Page Features

Status Bar, Backlighting, Contrast and On-Screen Messages

At the top of each page, a Status Bar (which is always displayed)

provides current status information for several unit features.

• Power to the unit is provided either by batteries or by

an auxiliary source (AC or DC Adapter). The Battery Power icon
displays the remaining power as the battery becomes depleted.

• Satellite signal status is shown when searching for (acquiring)

satellites, when a two-dimensional ﬁx is attained and when four or
more satellites have been received (three dimensional ﬁx).

• Backlighting is Off when you power up the unit. When On, it

uses a signiﬁcant amount of battery power. This icon displays
when the backlight is functioning.

• The Alarm Clock icon displays whenever the Alarm is set.
• The USB cable connection icon, displays when the unit is in com-

munication with a PC Universal Serial Bus.

You may want to adjust the backlight level by pressing down on the

POWER

key and releasing. Then tap the

POWER

key or

ROCKER

key

Up/Down arrows to cycle through the levels of backlight adjustment. To
adjust the screen contrast to improve readability for diffentent lighting con-
ditions, use the

ROCKER

key Left/Right arrows to move the contrast slider.

Whenever a signiﬁcant event in the operation of the unit occurs, an on-
screen message appears to advise you of the occurrence. In each case, the
condition is described and often a remedy provided. Pressing the

ENTER

key will acknowledge and close the message window.

On-Screen Messages

Backlight and

Contrast Adjustment

Sliders

(Brightnesses varies

according to battery

power level.)

«
...
15
16
17
18
19
...
»

Summary of Contents for GPS 60 - Hiking GPS Receiver































































































Reviews:

No comments

Related manuals for GPS 60 - Hiking GPS Receiver

RoadMate 760 - Automotive GPS Receiver

Brand: Magellan Pages: 131

RoadMate 3000T - Automotive GPS Receiver

Brand: Magellan Pages: 102

Brand: Nautic Laugic Pages: 3

RoadMate 9200-LM

Brand: Magellan Pages: 45

Brand: Garmin Pages: 100

Brand: StarTrac Pages: 4

aera 1900111700

Brand: Garmin Pages: 52

USB GPS Dongle ND-100

Brand: Globalsat Pages: 5

Brand: Agrident Pages: 45

Brand: Javad Pages: 92

Brand: Benefon Pages: 70

Brand: Mictrack Pages: 9

Brand: Garmin Pages: 2

Brand: Garmin Pages: 16

DIGITRAVELER 20-1601

Brand: Radio Shack Pages: 2

Ezi TraK EZIPVM-2003

Brand: Rojone Pages: 32

Lowrance iWAY 500C

Brand: Lowrance Pages: 80

Brand: Eagle Tree Systems Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands