background image

©

 2002 RadioShack Corporation. All Rights Reserved.

RadioShack, RadioShack.com, and DigiTraveler are trademarks 

used by RadioShack Corporation.
Street Atlas USA 2003

©

 2002 and 

XMap Handheld Street Atlas USA 

©

 2002 DeLorme. 

XMap and Street Atlas USA are trademarks used by Delorme.

OWNER’S MANUAL — 
Please read before using this equipment.

www.radioshack.com

20-1601/1602

www.delorme.com/rs

Be sure to read and print the software User’s Guide 
included on the DeLorme software discs.

+

056#..+0)

"

6*'

"

&

'

.

14/'

"

5

1(69#4'

1. Close all open programs. 

2. Insert the Installation disc into your CD-

ROM drive. Setup begins automatically.

If the Autorun feature is turned off, go to 
the 

Start menu and select 

Run

. In the 

command line text box, type 

D:

\

Setup

 

(if 

D

 is not the CD-ROM drive, insert the 

correct drive’s letter) and then click 

OK

.

3. Follow the on-screen instructions to 

complete the installation and restart your 
computer.

Once installation is complete, follow the steps 
below to use your GPS receiver with the 
mapping program installed on your PC or 
PDA.

.

#2612

"

'

&+6+10

"

5

'672

1. Insert one end of the connection cable 

into the receiver’s port and the other end 
into an available serial port on your 
laptop computer.

2. Insert the Program Data disc into your 

CD drive.

3. Open the DeLorme Street Atlas USA

®

 

2003 - RSE program.

4. Select the 

GPS tab and click 

Settings

.

5. Under 

Edit Settings, click 

Device

.

• Set 

Device to 

RadioShack 

DigiTraveler

.

• Set 

Port to 

COM1

.

• Set 

Settings to 

4800

,

8

,

N

,

1

.

6. Click 

Done

.

7. Under 

GPS Options:, check the desired 

options:

Auto Rotate Map

.

Auto Start GPS

.

8. Click 

Start GPS

. The receiver’s green 

LED lights.

*

#0&*'.&

"

2&#

"

'

&+6+10

"

5

'672

Handheld PDA software installation requires 
a desktop or laptop PC. Your receiver comes 
with cable assemblies that are compatible 
with handheld units featuring the Palm 
Universal Connector (PUC). If your PDA 
does not feature the PUC, an additional cable 
assembly is required.

1. Using the proper cable assembly for 

your PDA (available from RadioShack), 
plug one end of the connection cable 
into the receiver.

2. Connect the other end of the cable into 

the PDA serial port.

3. Open the XMap

®

 Handheld Street Atlas 

USA

®

 - RSE program.

4. Select the 

GPS tab.

5. Click 

Settings

.

• Set 

State: to 

XX

 (the 2 letter State 

abbreviation of your current location).

• Set 

Device: to 

RadioShack 

DigiTraveler

.

• Set 

Comport: to 

com 1

 (Pocket PC 

only).

VEHICLE’S DRIVER SHOULD NEVER 
OPERATE THE CONTROLS OF THE 
DIGITRAVELER WHILE DRIVING
 – either 
let a passenger operate, establish directions 
prior to driving, or use the verbal feature 
alone. Familiarize yourself with the 
DigiTraveler prior to initial road use.

USE CARE IN LOCATING THE 
DIGITRAVELER IN YOUR VEHICLE.
• Do not block the driver’s vision.
• Do not place near an airbag.
• Do not place where, if abruptly detached, 

the DigiTraveler could injure persons.

(%%

"

&GENCTCVKQP

"

QH

"

%QPHQTOKV[

This device complies with Part 15 of the 
FCC Rules. Operation is subject to the 
following two conditions: (1) this device may 
not cause harmful interference, and (2) this 
device must accept any interference received, including 
interference that may cause undesired operation.

 

6JG

"

(%%

"

9CPVU

"

;QW

"

VQ

"

-PQY

This equipment has been tested and found to comply with 
the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference 
by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and 
receiver. 

Connect the equipment into an outlet on a circuit 
different from that to which the receiver is connected. 

Consult your local RadioShack store or an experienced 
radio/TV technician for help.

If you cannot eliminate the interference, the FCC 
requires that you stop using your receiver. 

Changes or modifications not expressly approved by 
RadioShack may cause interference and void the user’s 
authority to operate the equipment.

%

#4'

Keep the receiver dry; if it gets wet, wipe it dry 
immediately. Use and store the receiver only in normal 
temperature environments. Handle the receiver carefully; 
do not drop it. Keep the receiver away from dust and dirt, 
and wipe it with a damp cloth occasionally to keep it 
looking new.
If your receiver is not performing as it should, take it to 
your local RadioShack store for assistance. Modifying or 
tampering with the receiver’s internal components can 
cause a malfunction and invalidate its warranty and void 
your FCC authorization to operate it.

Product: Personal GPS Navigation System

Model: 20-1601

Responsible Party: RadioShack

100 Throckmorton
Fort Worth, TX 76102

Phone: 817-415-3200

&KIK6TCXGNGT

]

#

"

+/2146#06

"

#

If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for more information.

RRRRý

— Warning 

#

 — Important

.

 — Caution

6VDC Jack

Cable Port

Thank you for purchasing a RadioShack 
DigiTraveler™. Your DigiTraveler receiver system 
features DeLorme mapping software. Your receiver lets 
you take advantage of the Global Positioning System 
(GPS) to locate your position on the globe, provide 
constant feedback regarding your position, trace your 
travel, and monitor your speed, direction, and 
elevation. Your receiver is easy to use and lets you 
work with GPS in an integrated mapping environment.

Green LED

20-1601-1602.fm  Page 1  Tuesday, September 3, 2002  3:30 PM

Reviews: