Page 1 of 8
English V1.0
laatste wijziging: 07-8-2018
User Manual GeoChaser Control
1.Introductie
The GeoChaser Control is a powerful GPS tracking system designed for tracking of vehicles
and reading out driver identification. The device has superior reception sensitivity, fast
positioning and supports four-band GSM frequencies 850/900/1800/1900, the location can
be viewed real-time on your personal 12Trace page or in the mobile App. The GeoChaser
has multiple in/outputs that can be used for monitoring or control of external devices. The
GeoChasers communicate with the GPRS/GSM network and can alert you when crossing a
virtual fencing (Geofence), low back-up battery or low communication credits.
Your GeoChaser uses the Global Positioning System (GPS). The GPS system is
maintained by the U.S. Government. Changes in availability and accuracy of the system
can adversely affect the operation of the GeoChaser. 12Trace cannot take any
responsibility for the reliability, availability and accuracy of the GPS system, as a result of
third parties. In the disclaimer of 12Trace you will find more information.
Tall buildings and metal structures can affect the determination of the position by
GeoChaser.
2. Interface Definitions:
There are 8 wires in the cable of the GeoChaser including the connection for the contact input, digital
input, analog input etc.
8) +12/24 Volt
7) GND
6) I-Button (red wire)
5) I-Button (white wire)
4) Release immobilizer,
green led
3) I-Button , red led
2) Ignition
1) unused
3. GeoChaser activation
To activate the GeoChaser he needs to be
registered.
