Garmin GPS 60 - Hiking GPS Receiver Owner'S Manual Download

Page: 83 / 94

GPSmap 60

Appendices

Data Field Options

Velocity Made Good -

The rate of closure on a destination based upon

your current speed and course of travel.

Vertical Speed -

The rate of altitude gain/loss over time.

Vertical Speed Dest -

The measurement of your rate of accent to a

predetermined height.

Water Speed -

The data acquired from measurement devices interfaced

to the GPSmap 60 is used to calculate your current speed over water.

Water Temperature -

The temperature of water at a measured depth

using measurement devices interfaced to the GPSmap 60.

Waypoint - Destination -

The last point on a route, your destination.

Waypoint - Next -

The next point on your route.

Summary of Contents for GPS 60 - Hiking GPS Receiver































































































Search results

Summary of Contents for GPS 60 - Hiking GPS Receiver

Reviews:

Related manuals for GPS 60 - Hiking GPS Receiver

Brands by name

Popular brands

Garmin GPS 60 - Hiking GPS Receiver, Owner'S Manual

Search results

Summary of Contents for GPS 60 - Hiking GPS Receiver

Reviews:

Related manuals for GPS 60 - Hiking GPS Receiver

Brands by name

Popular brands