Garmin GPS 60 - Hiking GPS Receiver Owner'S Manual Download | Manualshive

Page: 5 / 94

background image

iii

GPSmap 60

Introduction

The GPSmap 60 complies with Part 15 of the FCC interference limits

for Class B digital devices FOR HOME OR OFFICE USE. These limits are
designed to provide more reasonable protection against harmful interfer-
ence in a residential installation, and are more stringent than “outdoor”
requirements.

Operation of this device is subject to the following conditions: (1)

This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that
    to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Compliance

Information

The GPSmap 60 does not contain any user-ser-

viceable parts. Repairs should only be made by an
authorized Garmin service center. Unauthorized
repairs or modiﬁcations could result in permanent
damage to the equipment, and void your warranty
and your authority to operate this device under
Part 15 regulations.

«
...
3
4
5
6
7
...
»

Summary of Contents for GPS 60 - Hiking GPS Receiver































































































Reviews:

No comments

Related manuals for GPS 60 - Hiking GPS Receiver

Brand: Icar Pages: 7

Brand: PAJ GPS Pages: 3

Brand: Garmin Pages: 14

Brand: Navionics Pages: 38

Brand: Garmin Pages: 100

Brand: CHEP Pages: 8

Brand: Leica Pages: 48

Brand: Navigon Pages: 125

Brand: ACR Electronics Pages: 87

Brand: I-gotU Pages: 15

Brand: Qstarz Pages: 38

Brand: Whirlwind Pages: 16

Brand: OrbitGPS Pages: 26

Brand: MiTAC Pages: 18

Brand: UniGuard Pages: 18

Brand: danew Pages: 16

Brand: ULBOTech Pages: 26

Brand: AOYA Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands