Garmin GPS 60 - Hiking GPS Receiver Owner'S Manual Download

Page: 81 / 94

GPSmap 60

Appendices

Data Field Options

Glide Ratio Dest -

The glide ratio required to descend from your pres-

ent position and elevation to the destination’s elevation.

Heading -

Your direction of travel as indicated by a compass, in degrees

or cardinal letters (N,S,E,W).

Location (lat/lon) -

Your current location as latitude/longitude coordi-

nates.

Location (selected) -

Your current location described in the selected

units of measure (other than lat/lon).

Odometer -

The total distance you have traveled for all trips.

Off Course -

The distance off your direct course line, right or left.

Pointer -

The arrow that indicates the direction to travel to the next point

on a route.

Speed -

Your current vehicle speed can be measured in miles per hour,

kilometers per hour or knots.

Speed - Maximum -

The maximum speed you have attained since the

Trip Computer was reset.

Speed - Moving Avg. -

The average speed while your vehicle was

moving.

Speed - Overall Avg. -

The average speed determined by both the

moving and stopped time and speed.

Summary of Contents for GPS 60 - Hiking GPS Receiver































































































Search results

Summary of Contents for GPS 60 - Hiking GPS Receiver

Reviews:

Related manuals for GPS 60 - Hiking GPS Receiver

Brands by name

Popular brands

Garmin GPS 60 - Hiking GPS Receiver, Owner'S Manual

Search results

Summary of Contents for GPS 60 - Hiking GPS Receiver

Reviews:

Related manuals for GPS 60 - Hiking GPS Receiver

Brands by name

Popular brands