Garmin GPS 60 - Hiking GPS Receiver Owner'S Manual Download | Manualshive

Page: 6 / 94

background image

iv

GPSmap 60

CAUTION:

Use the GPSmap

®

60 at your own risk. To reduce the

risk of unsafe operation, carefully review and understand all aspects of
this Owner’s Manual—and thoroughly practice operation using the Demo
Mode prior to actual use. When in actual use, carefully compare indica-
tions from the GPSmap

®

60 to all available navigation sources, including

the information from other NAVAIDs, visual sightings, charts, etc. For
safety, always resolve any discrepancies before continuing navigation.

CAUTION:

IT IS THE USER’S RESPONSIBILITY TO USE THIS

PRODUCT PRUDENTLY. THIS PRODUCT IS INTENDED TO BE USED
ONLY AS A NAVIGATIONAL AID AND MUST NOT BE USED FOR ANY
PURPOSE REQUIRING PRECISE MEASUREMENT OF DIRECTION,
DISTANCE, LOCATION OR TOPOGRAPHY. THIS PRODUCT SHOULD
NOT BE USED AS AN AID TO DETERMINE GROUND PROXIMITY
FOR AIRCRAFT NAVIGATION.

CAUTION:

The electronic chart is an aid to navigation and is

designed to facilitate the use of authorized government charts, not replace
them. Only ofﬁcial government charts and notices to mariners contain
all information needed for safe navigation – and, as always, the user is
responsible for their prudent use.

Warnings and Precautions

Introduction

«
...
4
5
6
7
8
...
»

Summary of Contents for GPS 60 - Hiking GPS Receiver































































































Reviews:

No comments

Related manuals for GPS 60 - Hiking GPS Receiver

Brand: Yepzon Pages: 2

Brand: PAJ GPS Pages: 3

Brand: Carscop Pages: 11

Brand: Navionics Pages: 38

Brand: Lowrance Pages: 1

Brand: Queclink Pages: 13

Brand: Fleet Complete Pages: 12

RoadMate Pro 5190T

Brand: Magellan Pages: 65

Brand: Mobicom Telematics Pages: 18

Brand: Genius Pages: 17

Brand: XAiOX Pages: 17

Brand: Quark-Elec Pages: 5

Brand: VKB-Sim Pages: 2

Brand: Javad Pages: 20

Brand: Cheetah Pages: 2

Brand: Micron Electronics Pages: 8

Brand: SQUANTO Pages: 10

Brand: Mizway Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands