Garmin Approach G5 - GPS-Enabled Golf Handheld, Install Manual & Pilot'S Manual

Page: 45 / 238

Garmin G5 Install Manual & Pilot's Guide 190-02072-00 Rev. E
29
Unit Installation
Installation Manual
Pilot's Guide
Appendix
Index
1.3.6.4 CAPTIVE MOUNTING SCREW REPLACEMENT
The captive 3/32” hex socket head screw can be used for panel thicknesses
up to 0.150 inch. For installations with a panel thickness greater than
0.150 inch, the captive mounting screw can be replaced with a standard
#6-32 hex socket head screw. To replace the screw, remove the two
#4-40 flat head Phillips mount plate screws, the G5 screw mount plate, and the captive
screw as shown in Figure 1-16. Reverse this process to install the longer #6-32 hex
socket head screw. Ensure correct orientation of the screw mount plate before applying
6-8 in-lb of torque to the #4-40 mount plate screws.
NOTE: Standard #6-32 hex socket head screws use a 7/64” hex drive feature. The
access hole in the G5 bezel is large enough to accommodate this increase in hex
tool size.
G5 SCREW
MOUNT PLATE
MOUNTING SCREW,
#4-40 FLHP x 0.25[6.4]
2 PLACES
CAPTIVE 3/32 HEX
SOCKET HEAD SCREW
Figure 1-16 G5 Captive Mounting Screw Replacement