Garmin G5 Install Manual & Pilot's Guide
190-02072-00 Rev. E
27
Unit Installation
Installation Manual
Pilot's Guide
Appendix
Index
1.3.6.3 UNIT INSTALLATION
The G5 is installed by inserting the alignment pin located at the top of the unit into
the mating hole in the mounting ring, pushing the unit flush with the instrument panel,
and fastening the captive 3/32” hex socket head screw to the mounting ring as shown
in Figure 1-14. To fasten the captive screw to the mounting ring, insert a 3/32” hex
drive tool through the access hole in the front cover of the G5 as shown in Figure 1-15.
Torque the captive mounting screw to 10-12 in-lb.
Figure 1-14 G5 Alignment Pin
ALIGNMENT PIN
CAPTIVE 3/32 HEX
SOCKET HEAD SCREW
Summary of Contents for Approach G5 - GPS-Enabled Golf Handheld
