Garmin Apollo CNX80, Installation Manual

Page: 132 / 168

Appendix C - Equipment Compatibility
C-2 560-0982-00 Rev D Apollo CNX80 Installation Manual
C.4 A
LTIMETERS FOR
B
ARO
C
ORRECTION
The following altimeters are compatible with the CNX80. Other altimeters may be used to provide baro
correction to the CNX80 provided they have a potentiometer with a minimum resistance of 5 k
Ω
.
Manufacturer Model Notes
Bendix/King KEA-130A
KEA-346
Kollsman 44929-935
24929-519 thru 532
Aerosonic 10420-11968E
United Instruments 5506-S()3-()
C.5 A
UTOPILOTS
The following autopilots are compatible with the CNX80. Other autopilots may be used with the CNX80
provided that they have a Nav mode and accept analog deviation data and flags meeting the specifications
defined in section 1.3.9.1.1.
Manufacturer Model Interface Notes
S-TEC System
20/30/40/50/60-1/60-2/60 PSS/65
Analog deviation
S-TEC System 55X Analog deviation,
ARINC 429 GPSS
S-TEC ST-901 ARINC 429 GPSS
GPSS Roll Steering
Converter
Century I / II / III / IV
21 / 31 / 41
2000
Triden Analog Deviation
Bendix/King KAP 100/150
KFC 200/225/300/325
KCP 320
Analog Deviation
C.6 E
LECTRONIC
HSI’
S
The following EHSI’s are compatible with the CNX80. Other EHSI’s or navigation displays may be used
with the CNX80 provided that they accept serial data in the format defined in B.2.1 or ARINC 429 data as
defined in 2.8.10.2.2.
Manufacturer Model Interface Notes
Sandel Avionics SN3308 Analog deviation and
RS232 Low-speed