Appendix C - Equipment Compatibility
Apollo CNX80 Installation Manual
560-0982-00 Rev D
C-1
APPENDIX C
-
E
QUIPMENT
C
OMPATIBILITY
C.1 A
LTITUDE
S
OURCES
The following altitude sources are compatible with the CNX80. Other altitude data sources may be used
provided they meet the serial specifications defined in B.1.1 or provide the ARINC 429 labels defined in
2.8.10.2.1.
Manufacturer Model
Data
Format
Notes
Trans-Cal SSD120
RS232
High resolution (10 ft) encoder
ICARUS 3000U
RS232
Low resolution (100 ft) serializer
Sandia Aerospace
SAE5-35 RS232
High resolution (10 ft) encoder
Garmin AT
SL70/
SL70R
RS232
If the SL70 is provided with gray code altitude from any
standard encoder, the SL70 will transmit altitude data
(100 ft resolution) to the CNX80. For the SL70,
altitude data is provided to serial port 6 configured for
SL70.
B & D Instruments
90004
ARINC 429
Low-speed
Shadin 8800-M
RS232
High resolution (1 ft) encoder
C.2 F
UEL
/A
IR
D
ATA
C
OMPUTERS
The following fuel/air data computers are compatible with the CNX80. Other altitude data sources may be
used provided they meet the serial specifications defined in B.1.2.
Manufacturer Model
Data
Format
Notes
Shadin F/ADC-200
F/ADC-2000
DigiData
RS232
[1]
Shadin Digiflo-L
Miniflo-L
Microflo-L
RS232
Fuel data only
JP Instruments
FS-450
RS232
Fuel data only
JP Instruments
EDM-700/800 RS232
Fuel Flow option (Fuel data only)
[1] If it is desired to have the F/ADC calculate wind data, ground speed and track angle must be provided to
the FADC using a CNX80 MAPCOM RS232 output. If the MAPCOM data is not supplied to the FADC,
the CNX80 will calculate wind data using other data supplied by the FADC.
C.3 H
EADING
S
OURCES
The following heading sources are compatible with the CNX80. Other heading sources may be used
provided they meet the provide the ARINC 429 labels defined in section 2.8.10.2.1 or provide standard
XYZ synchro data.
Manufacturer Model
Interface
Notes
Litef LCR-92/93
ARINC
429
High-speed
Litton LTN-92
ARINC
429
High-speed
Century Flight Systems
1D755
Synchro
Bootstrap output from HSI
Sandel Avionics
SN3308
ARINC 429
Low-speed
Bendix/King KCS55/KI525A
Synchro
Bootstrap output
Summary of Contents for Apollo CNX80
