Garmin Apollo CNX80, Installation Manual

Page: 86 / 168

Post-Installation Configuration & Checkout
3-14 560-0982-00 Rev D Apollo CNX80 Installation Manual
Table 3-3 – Lamp Output Test Items
Display
Label Signal
Name
Connector -
Pin Notes
MSG Message Annunciate P5-64
PTK Parallel Track Annc P5-62
SUSP Suspend Annunciate P5-63
APR Approach Annunciate P5-61
LOI LOI Annunciate P5-65
ALT Altitude Alert Annc P5-69
PAA Precision Appr P5-68
TRM Term Mode Annc P5-67
WPT Waypoint Annunciate P5-66
BCKCRS Back Course Out P7-15
GPSIND GPS Indicator Out P7-17 The GPSIND and NAVIND toggle, so one is always ON
NAVIND NAV Indicator Out P7-18 The GPSIND and NAVIND toggle, so one is always ON
DR Dead Reck Annunciate P5-60
For each annunciator that is used, verify proper operation by turning the annunciator ON and OFF.
Press the
TEST
or
BACK
smart key to return to the Ground Maintenance Test menu.
3.3.1.1.5 Display Test
The Display Test function displays various test patterns and can be used to verify the CNX80 display
operation. While on the Ground Maintenance main TEST menu page, press the
NEXT PAGE
line select
key, followed by the
DISPLAY
line select key to go to the Display Test page. Turn the outer knob while on
any Test Pattern page to display the next Test Pattern Page in the sequence. The order of test pages is
Fonts 1, Fonts 2, Fonts 3, Bitmaps, Red, Green, Blue, White, Black, White on Black, and Black on White.
The first available display test screen is shown in Figure 3-15.
Figure 3-15 - Display Test Initial Screen
Press the
TEST
or
BACK
smart key to return to the Ground Maintenance Test menu.