Appendix B - Serial Interface Specifications
Apollo CNX80 Installation Manual
560-0982-00 Rev D
B-5
The serial input message string is expected in the following format.
<STX><message><message> ... <message><chksum><ETX>
<STX> ..................................................ASCII “start of text” character (STX = 02h)
<message> .............................................starts with an ASCII “Z”, then an ID character, followed
by the message data, a carriage return (CR = 0Dh), and a
line feed (LF = 0Ah) See the following table.
<checksum>...........................................the message checksum, same format as message
<ETX> ..................................................ASCII “end of text” character (ETX = 03h)
Table B- 4 - Fuel/Air Data Message Data (Z Format)
Item
Desig
Message
Format
Message
Mnemonic
Field
Width
Message Description
ZA
ddd
IAS
7
Indicated Air Speed in knots
ZB
ddd
TAS
7
True Air Speed in knots
ZC
ddd
MACH
7
Mach Speed in thousandths
ZD
sdddd PALT
9
Pressure Altitude in tens of feet, +/- sea level
ZE
sdddd DALT 9
Density Altitude in tens of feet, +/- sea level
ZF
sdd
OAT
9
Outside Air Temp - or “Total”, in degrees Celsius
ZG
sdd
TAT
7
True Air Temp - or “Static”, in degrees Celsius
ZH
ddd
WDIR
7
Wind Direction, 0 to 359 degrees from true north
ZI
ddd
WSPD
7
Wind Speed in knots
ZJ
sdd
TURN
7
Rate of Turn in +/- degrees/second, + is right, - is left
ZK
sddd VSPD
8
Vertical
speed in tens of feet/minute
ZL
ddd
HEAD
7
Heading, 0 to 359 degrees from true north
ZM
dddd
RFF
8
Right Engine Fuel Flow in tenths of gallons/hour
ZN
ddddd
RFU
9
Right Engine Fuel Used in tenths of gallons
ZO
dddd
LFF
7
Left Engine Fuel Flow in tenths of gallons/hour
ZP
ddddd
LFU
9
Left Engine Fuel Used in tenths of gallons
ZQ
ddd
ERR
7
Error Log / Reason Indicator: 001 = temp sensor error; 000
= no errors
ZR
ddd
CKSM1
7
Checksum of labels A to Q (0 to 255)
ZS
ddd
GSP
7
Ground speed (0-999 knots)
ZT
ddd
TRK
7
Track (0 to 359 degrees, magnetic)
ZU
dddddd
DIS
1
Distance to Destination (0 to 999999, nm * 100)
ZV
sddd
MVAR
8
Magnetic Variation (0 to 999 degrees, deg * 10), s = E or W
where E = east, W = west
ZW
sddmmhh
LAT
13
Current Latitude, s = N or S, dd = degrees, mm = minutes
ZX
sdddmmhh LON
14
Current Longitude, s = E or W, ddd = degrees, mm =
minutes, hh = hundredths of minutes
ZY
ddd
CKSM2
7
Checksum of labels S to X (0 to 255)
Summary of Contents for Apollo CNX80
