Garmin Apollo CNX80, Installation Manual

Page: 25 / 168

General Information
Apollo CNX80 Installation Manual 560-0982-00 Rev D
1-15
The CNX80 contains additional functions beyond those defined in the TSO’s. These functions have been
evaluated as part of the initial STC. However, for some installation certifications additional information
(drawing lists and software documentation) may be required for aircraft installation certification. Contact
Garmin AT Customer Support for assistance in providing the additional information required for
installation certification.
1.4.2 TSO A
UTHORIZATION
Table 1-1 - TSO Authorization
Function TSO
Minimum Performance
Standard
Software
RTCA/DO-178B
Com
TSO-C37d, Transmitter, 100nm range
TSO-C38d, Receiver
TSO-C128, Stuck Mic RTCA/DO-186A, Class 4,
RTCA/DO-186A, Class D
RTCA/DO-207
Level C
VOR/ILS
TSO-C34e, Glideslope
TSO-C36e, Localizer
TSO-C40c, VHF Omni Range RTCA/DO-192, Cat B
RTCA/DO-195, Cat A
RTCA/DO-196, Cat B
Level C
GPS/WAAS TSO-C146a RTCA/DO-229C, Class 1 Level B
MFD TSO-C113, Display SAE AS 8034 Level B
1.4.3 FCC G
RANT OF
E
QUIPMENT
A
UTHORIZATION
•
FCC ID: EOJ52ICOM96
1.4.4 CNX80 STC A
UTHORIZATION
Refer to Garmin AT document 560-0988-00 for data regarding CNX80 STC authorization.
1.5 D
ATABASE
U
PDATES
The CNX80 utilizes a database stored on a Compact Flash Memory datacard for easy updating and
replacement. The database is updated by simply inserting an updated database card into the slot in the front
panel in the CNX80.
The CNX80 comes with a compact flash memory card reader/writer (R/W). The R/W is intended for
updating the included database card using a PC. Refer to the installation manual included with the R/W for
instructions on how to install and operate the compact flash R/W.
The database on the CNX80 database card is generated from current Jeppesen-Sanderson data and
converted to a format that is used by the CNX80. The data conversion process is performed using software
that is developed and maintained under Garmin AT configuration management according to RTCA/DO-
200A, Standards for Processing Aeronautical Data.
CNX80 users update their database card by purchasing database subscription updates from Jeppesen-
Sanderson. The database card is programmed using the supplied compact flash memory card R/W and
Jeppesen-provided software. Contact Jeppesen at 800-621-5377 or www.jeppesen.com for more
information and instructions.
Contact Garmin AT, Inc. for information on databases available for the CNX80.