![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014980/governor-ten014980_user-manual_563861114.webp)
13-17-621 Page 114
4.7.5.2 Fan Control:
There are two fan control types:
Constant
and
Thermostatic
. Figure 161 below shows the
Fan Control
setting selection drop down menu.
Constant:
Under this setting the cooling fan will run continuously anytime the main motor of the machine
is running.
Thermostatic:
This setting runs the cooling fan based on thermal sensor feedback. If the temperature goes
up beyond a set limit then the controller will turn on the cooling fan and will turn off if the temperature goes
below the set limit.
Figure 161: Fan Control
4.7.5.3 Fan Shutoff Delay:
The
Fan Shutoff Delay
is a time delay setting for the fan to continue running for a set period after the
main motor has been shut off for additional machine cooling. This setting is shown below in Figure 162,
you can see that the fan delay can be set between 0 and 20 minutes.
Figure 162: Fan Shutoff Delay