![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014980/governor-ten014980_user-manual_563861042.webp)
13-17-621 Page 42
To log in, select the desired access level from the
User
dropdown, enter the password into the
Password
field, and press the
Log In
button.
The available access levels and default passwords are shown below in Table 28 below.
Table 28: Access Levels
User Level
Default Password
Description
User
None
Default level, limited access
Maintenance
407
End user. Basic settings access and ability to reset service
timers.
Technician
8412
Advanced access targeted towards distributors and service
technicians.
Factory
Contact Gardner
Denver
Full access to all settings and features. The password
rotates automatically throughout the life of the machine. It
may not be changed. This password should only be required
under unusual circumstances and must be provided by
Gardner Denver Technical Support.
Note that the passwords can be changed from the default using the
Adjustments
button on the left of the
screen once logged in.
After logging in, press the
Close
button to return to the previous screen.
3.6 Setting Up
Before running the machine, there are several basic configuration settings that may need to be changed.
3
.
6.1 Controller Configuration
Basic controller configuration is located under the Settings > Configuration menu as shown in Figure 52.
Figure 52: Configuration Menu
First, ensure that the units are set as desired by selecting the
Locale
link from the Configuration menu. The
Pressure, Temperature, and Flow Units can be set individually as shown in Figure 53. If the Language
needs to be changed, it may be changed by selecting the
Language
button below the units.