![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014980/governor-ten014980_user-manual_563861024.webp)
13-17-621 Page 24
Analog Outputs (X10)
Only shielded cable must be used for analog output connections. Figure 24 and Table 16 shows the
connector (GD part
TEN014961
) used and connector pin to signal details for the systems with 2 analog
output designs with IO module part numbers TEN014983 & TEN014980.
While, Figure 25 and Table 17 shows the connector (GD part
TEN014960
) used and connector pin to signal
details for the systems with 1 analog output designs with IO Module # TEN014982.
Figure 24: Analog Output (X10)
Table 16: AO (X10)
Analog Output (X10) Connections
Pin
Signal Name
1
+AO01
2
-AO01
3
+AO02
4
-AO02
Figure 25: Analog Output (X10)
Table 17: AO (X10)
Analog Output (X10) Connections
Pin
Signal Name
1
+AO01
2
-AO01
Analog Inputs (X11)
Only shielded cables must be used for analog input signals. Following are the details for analog inputs
connection for 3 available options of 6, 4 & 3 analog inputs.
6 Analog Input Configuration
Available with IO module part numbers TEN014982 & TEN014983. Figure 26 below shows the connector
(GD part TEN014967) and Table 18 connector pin to signal details for 6 analog input designs.
Figure 26: Analog Input (X11)