![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014980/governor-ten014980_user-manual_563861176.webp)
13-17-621 Page 176
Each file created lists the various parameters at various times, as shown in Figure 196 below.
Figure 196: Event Trace data log file
Machine Configuration Files:
In addition to the above folders, the logger folder contains 3 configuration files shown in Figure 197 below.
These files contain all of the current settings and configurations of the machine.
Figure 197: Machine Configuration Files
System Dump File:
The logs also contain the system dump files which can be used by Gardner Denver support for
diagnostics. If this file is requested, please forward to Gardner Denver support. Figure 198 shows the
system dump file for this example.
Figure 198: System Dump File
6.4.3 System:
The Controller
System
screen gives information about the status of the controller and its operation. The
System menu has been distributed between 6 tabs. Note under most circumstances the user will not need
to access this page and it will only be needed when directed by Gardner-Denver service or engineering.
SDM:
The SDM screen shows the status of each element of the system. Figure 199 below shows the SDM tab.