![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014980/governor-ten014980_user-manual_563861026.webp)
13-17-621 Page 26
Table 20: AI (X11)
Analog Input (X11) Connections
Pin
Signal Name
1
+24 V_AI
2
AI01
3
+24 V_AI
4
AI02
5
+24 V_AI
6
AI03
PT1000/PTC Inputs (X12)
Only shielded cable must be used for PT1000/PTC inputs. Based on the system design there are three
types of connections used for PT1000/PTC input signals. Following are the details.
Available with IO Module part numbers TEN014982 & TEN014983. Figure 29 shows the connector (GD
part TEN014968) used and Table 21
have the connector pin to signal details.
Figure 29: PT1000/PTC Inputs (X12)
Table 21: PT1000/PTC (X12)
PT1000/PTC (X12) Connections
Pin
Signal Name
1
+PT1000 01
2
-PT1000 01
3
+PT1000 02
4
-PT1000 02
5
+PT1000 03
6
-PT1000 03
7
+PT1000 04
8
-PT1000 04
9
+PT1000 05
10
-PT1000 05
11
+PT1000 06
12
-PT1000 06
13
+PT1000 07
14
-PT1000 07
Available with IO Module part number TEN014980. Figure 30 shows the connector (GD part TEN014966)
used and Table 22 have the connector pin to signal details.