![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014980/governor-ten014980_user-manual_563861192.webp)
13-17-621 Page 192
SECTION 8
WEB INTERFACE
The controller HMI may be viewed as a web interface from a remote location on an internet browser. This
allows monitoring of the compressor when away from the physical machine. All that is needed is the
IP
Address
from the
Settings > Configuration > Communication
menu under the
Ethernet
tab.
Enter the IP address into a web browser with ‘
:81
’ at the end to specify port 81. The web interface will
look like Figure 224, below. As seen in the figure, the web interface shows the user the pressure and
temperature limits, with current pressure and temperature readings on the gauges for the machine being
monitored.
There is also a list of active alarms and alarm history for the machine. The hours left to service, loaded
hours, and total run hours are listed here as well on the right side of the interface. Lastly, there are
indicators for remote halt, timer control, and auto restart.
Figure 224: Web Interface