13-17-621 Page 54
Figure 68: Set Intervals
All other service elements will be set or changed using the same logic as above.
4.1.1.2 Presetting a Timer Value
In some circumstances it is necessary to set the value of time remaining on a maintenance timer. For
example, when replacing a controller in the field the timer values will need to be set to match the actual
time remaining before they need to be changed.
To change the current value of a timer press anywhere on the bar which will bring up another screen called
New Service Times
, which displays the
Hours Left to Service
and
Time Left to Service
, shown in Figure
69 below. Only users with the technician or factory login credentials can create new service timers.
Figure 69: New Service Time
The service timers can be manually adjusted by selecting the input box and entering the new time on the
number pad, shown in Figure 70, below. The time entered will need to be between the constraints shown
as ‘min’ and ‘max’ on the number pad.
