![background image](http://html1.mh-extra.com/html/gardner-denver/governor-ten014980/governor-ten014980_user-manual_563861027.webp)
13-17-621 Page 27
Figure 30: PT1000/PTC Inputs (X12)
Table 22: PT1000/PTC (X12)
PT1000/PTC (X12) Connections
Pin
Signal Name
1
+PT1000 01
2
-PT1000 01
3
+PT1000 02
4
-PT1000 02
5
+PT1000 03
6
-PT1000 03
7
+PT1000 04
8
-PT1000 04
Available with IO Module part number TEN014981. Figure 31 shows the connector (GD part TEN014963)
used and Table 23 have the connector pin to signal details.
Figure 31: PT1000/PTC Inputs (X12)
Table 23: PT1000/PTC (X12)
PT1000/PTC (X12) Connections
Pin
Signal Name
1
+PT1000 01
2
-PT1000 01
3
+PT1000 02
4
-PT1000 02
PT1000/PTC Inputs (X13)
Only shielded cable must be used for PT1000/PTC inputs. Based on the system design there are three
types of connections used for PT1000/PTC input signals X13. Following are the details.
Available with IO Module part numbers TEN014981 & TEN014983. Figure 32 below shows the connector
(GD part TEN014962) used and Table 24 have the connector pin to signal details.
Figure 32: PT1000/PTC Inputs (X13)