46
Via Leonardo da Vinci, 32/B
36034 Malo (VI) Italia
Operation and maintenance manual
Rev. 01/18-GB
TZ FIBER 540E / 630E / Conveyor-E
- Observe the conformity of recommended oils.
Keep lubricants outside of the reach of children.
Carefully read the instructions and safety warn-
ings on the lubricant containers. Wash thor-
oughly after use.
- Once maintenance and repairs are complete
and before restarting the machine, make sure
that the work is completed, that the safety de-
vices have been reactivated and that the guards
have been replaced.
- When working on soft ground, near drop-offs,
ditches or slopes proceed with caution to avoid
any tilting of the machine.
- Never touch parts whilst in movement or place
things between them (especially the toothed
disc) maintaining a safe distance.
- It is strictly forbidden to remove or tamper with
the safety devices.
- Read and understand the instructions ot the
operating machine and, in particular, the
safety information.
2.3 WARNING SIGNS
The machine has been designed adopting all pos-
sible safety standards for the protection of those
using it. Nevertheless there may be additional
risks, some of which are reported on the machine
with the adhesive warning signs (pictograms) that
indicate the various situations of insecurity and
danger in essential form.
Figure 4 shows the position in which these picto-
grams are positioned. It is necessary to keep them
clean and replace them immediately if they be-
come loose or damaged.
When replacing damaged or missing safety stick-
ers, position them in the same location provided.
With reference to Figure 4, please read that de-
scribed below and memorize its meaning.
1) Wear close-fitting clothes without straps that
could get caught in moving parts. During work-
ing hours, wear reflective clothing.
2) When the machine is working, protect your
head properly with a helmet.
3) Wear protective cut-resistant gloves.
4) When at work, wear ear muffs.
5) When working, wear protective shoes with re-
inforced toes which are non-slip.
6) Connection points for lifting the machine.
7) Direction of rotation of the toothed disc.
8) Attention, pressurized pipes, do not drill.
9) During work, make sure that outsiders are at a
safe distance and out of range of the excavator.
10) Hot surfaces are a burn hazard. Before
working on the engine, wait until the hot parts
cool down.
11) Adjustment and maintenance must be car-
ried out but only after reading the instruction
manual, with the machine idle and the engine
switched off.
12) There is danger of injury to the upper limbs.
Keep a safe distance from the machine.
13) Blunt objects may be propelled while the
machine is operational. Keep a safe distance.
14) There is danger of injury to the lower limbs.
Keep a safe distance from the machine.
15) There is danger of shearing to the lower
limbs. Keep a safe distance from the machine.
16) Label indicating the noise level (LwA).
2.4 ECOLOGY AND POLLUTION
- Comply with the laws in force with regard to the
use and disposal of products used for the clean-
ing and maintenance of the machine as well as
observing the manufacturers recommendations
of such products.
- Keep the labels and instructions of the prod-
ucts used in case of ingestion of fluids or other
chemical substances, etc. immediately contact
the “Emergency Room” having these labels or
instructions to hand.
- Comply with the laws in force in the country
where the machine is used, regarding the use
and disposal of products used for cleaning and
maintenance. Dispose of any waste through the
