45
TZ FIBER 540E / 630E / Conveyor-E
Via Leonardo da Vinci, 32/B
36034 Malo (VI) Italia
Operation and maintenance manual
Rev. 01/18-GB
chine or from modifications carried out on it with-
out authorisation. It is necessary to consider that
in taking the risk of improper use the user must
also assume liability for the consequences.
- Safety should always be the priority objective of
the operator. The machine must not be if it is
not safe or in poor operating conditions. Always
perform a preliminary inspection of the machine
before using it.
- The user agrees to entrust the machine exclu-
sively to qualified personnel who have been
trained for the purpose.
- It is forbidden for anyone to drive or operate the
machine if they have not read and assimilated
the contents of this manual, including incom-
petent staff, who are not in good physical and
mental health and who are under the age of 18
years.
- It is the user’s responsibility to take all appro-
priate measures to prevent unauthorized people
from using the machine.
- The user agrees to adequately inform staff with
regard to the application and compliance of
safety requirements.
- The user must inform the Manufacturer in the
event he uncovers defects or malfunctions in the
safety systems or of any situation where there is
alleged danger.
- The operator must use the individual means of
protection under the law and follow the instruc-
tions in this manual at all times.
- The operator must abide by all the danger and
caution markings on the machine.
- The operator should not perform any interven-
tion or operation under his own initiative that is
not his responsibility.
- The machine has only been tested with the
standard package. The assembly of parts from
other manufacturers or any changes can alter
the characteristics of the machine and thus im-
pair the operational safety.
Use original spare parts at all times.
- The machine must not be operated with guards
removed or if it is partially damaged.
- The machine should not be operated in enclosed
environments or if there is a risk of explosion or
fire.
- The machine can only be operated in daylight
hours.
- Operations and adjustments on the machine
must always be performed when the machine is
idle with the engine switched off.
- Operations and adjustments on the excavator
disc attached to the machine tool, must always
be done with the machine stopped and engine
off.
- IT IS STRICTLY FORBIDDEN TO LEAVE OR
ABANDON THE MACHINE WHILE THE EN-
GINE IS RUNNING.
- Before commencing any work, check for un-
derground power cables, pipelines or other
hazards in the excavation area.
- Wear suitable clothing. Avoid wearing loose
clothing which could catch in the moving parts.
Long hair should be tied up. The operator should
also avoid carrying sharp tools in his pockets.
- During maintenance and repair the use of pro-
tective clothing, safety gloves, sturdy shoes and
crush is required.
- Before starting the machine, check the integrity
of all the safety devices.
- Before starting work for the first time, familiarize
yourself with the controls and their functions.
- The area in which the machine is used is to be
considered a ‘danger zone’, especially for those
not trained in its use.
- Before starting the machine, check that all
around the work area there are no persons or
animals or obstructions of any kind.
- When a person is exposed to danger, that he is
in the «Danger zone», the operator must imme-
diately intervene by stopping the machine and
removing the person in question.
- Should the protective casings be removed,
please ensure that they are correctly restored
before using the machine.
