58
Download
Configuration from
Analyzer
Used to download the analyzer’s complete configuration and save it to a
Galvanic-proprietary file format.
Upload
Configuration to
Analyzer
Used to upload a previously-saved configuration file to the analyzer
Reboot Analyzer
Used to trigger a reboot of the entire analyzer system.
Upgrade IO Board
Firmware
Used to upgrade the firmware of the analyzer’s IO board
In addition to these buttons, there is also a field marked
PWM
% of Full Scale
which is used to set heater
PID parameters. The chosen percentage should be entered into the field, and the
Write to IO Board
button
pressed to save this value to the analyzer’s IO Board.
Making changes to any parameters on the Factory Setup page has the potential to
render the analyzer inoperable. No changes should be made on this page without
the express guidance of the Galvanic Applied Sciences Service Department.
