48
Figure 36: Events Page
To display the analyzer’s Event Log, simply press the refresh button ( ) at the bottom left of the
Events page. A change of one type or another is what causes a record to be placed into the event
log. Changes that can cause a record to be entered into the event log include an alarm condition
being triggered or being cleared, a change in the analyzer configuration either from keypad or
from the web GUI, or an event triggered remotely via a digital input. Every event record in the
event log has a sequence
ID
, a
Timestamp
set according to the analyzer’s real time clock, an
Event
title, and at least one
Description
that describes what the event was.
4.4.13 Discrete Inputs Page
The Discrete Inputs page is used to configure the AccuLase-GPA™ digital inputs, which can be used
to remotely trigger any analysis run and / or hardware output of the user’s choice. It is shown in
