Revision 4
82
12/15/2018
Figure 6-6: Integration Window
d) Select
Skimming
as the Integration Method and enter the integration window data in the
appropriate fields.
e) Select the desired items (e.g. method, Heating value Units, Base Pressure and
concentration of higher alkanes).
f) Edit the Calibration Gas Physical Properties at the bottom of the window.
Do not adjust the
Savitzky Golay
fields.
g) Press the
Write to Analyzer
button.
6.3.2 Editing an Action
Actions are used to open/close valves, set the end of analysis or to set a valve purge. A
detailed discussion of editing the
Action Table
is presented in Section 5.5.
6.3.3 Editing Alarms
Alarms can be set to report levels of a compound above or below expected limits as
described in Section 5.6
Summary of Contents for AccuChrome MA2963
