SER
VICING
66
PULSE Installation, Commissioning and Servicing Manual - Revision 19
8
REPLACING THE PUMP UNIT
/
AIR SEPARATOR STRAINERS
These instructions apply only to a Tatsuno pump. Information relating to a Bennett
pump may be found at:
https://fuelsystems.gallagher.com/media/1675/bennett_pump_manual.pdf
The Pump Unit/Air Separator contains two separate strainers - Inlet and Outlet.
8.1 To Replace the Inlet Strainer:
(a) locate the strainer at the back of the pump unit. Unscrew the bolts from the strainer
cover.
(b) pull out the inlet strainer.
(c) unscrew the bolt from the stopper that holds the strainer to the strainer cover.
(d) pull out the stopper.
(e) ensure that the replacement strainer has three pre-punched holes.
(f) ensure that the strainer cover is put back in the correct orientation as shown and
screw back the bolt to the stopper that holds it to the strainer cover.
(g) screw in the elbow.
(h) fit the test valve assembly into the elbow.
a
a
bb
cc
dd
gg
ee
hh
ff
