SER
VICING
94
PULSE Installation, Commissioning and Servicing Manual - Revision 19
15.9 Errors - ERRORS
The Errors function displays the number and type of errors that have occurred since the
error log was last cleared. The errors are displayed for each fuelpoint.
A PULSE dispenser logs all errors to the SD Card (even those that have been cleared) in
a form that is not easily read. Gallagher Technical Support can interpret dispenser logs
and provide a more detailed description of errors.
In Service Mode, scroll to
ERRORS FP1
Press keys
4
or
6
to select the Fuel Point. The status will
display in the CPL window as ALL OK or ERROR.
FATAL ERRORS
require the dispenser to be repowered to clear the error. If the error persists
some action will be required to address the cause.
NON-FATAL ERRORS
are cleared by lifting and rehanging a nozzle. These errors are not displayed
using the method previously outlined. Non-fatal errors are recorded to the SD Card.
C
FLUID
ERRORS
L
18
CPL Window
ALL OK
CPL Window
0
CPL Window
C
FP1
ERRORS
L
C
FLUID
L
ERRORS*
FP1
ERRORS
L
Press
F
to enter Errors Menu for the selected Fuel Point.
Use
2
or
8
to scroll through specific errors;
FLUID, POS, ENCODER, RATIO,
etc
The number of instances of each type of error (since last
cleared) is shown in the first available CPL window
To clear an error counter press
f
(
ERRORS*
shows
edit mode), then
0
.
Press
to return to the initial
ERRORS
screen.
$
$
$
$
Version 1.20
