SER
VICING
85
PULSE Installation, Commissioning and Servicing Manual - Revision 19
14.2 Entering Service Mode
Service Mode is accessed by holding down the
F
key for three seconds. The word
FILL
is displayed in the Preset window and then disappears.
Enter the Service Mode password and press
F
to confirm or
to clear and retry.
The screen will show
SDCARD ACTIVE
.
Once in Service Mode, the
2
and
8
keys initially serve as direction keys and are used
to navigate through the service menu.
Pressing the
F
key in most cases allow entry to a particular menu item to edit the
settings of a function. Edit mode is indicated with an *.
Pressing the
F
key also saves changes. Press
to clear.
The
2
and
8
keys allow navigation through different menu items.
Keys
4
and
6
are also used to navigate within options for a selected menu item.
The
5
key mostly is used to toggle a function on or off.
Only one UI (User Interface Display) should be put into Service Mode at any given
time. If an attempt is made to put a second UI into Service Mode it will not
respond until the first UI is taken out of Service Mode.
To Exit Service Mode
To exit service mode press
and hold for 3 seconds.
15
SERVICE MODE FUNCTION SCREENS - VERSION 1�20
The figure below shows the order in which the various service mode function screens
will appear starting at SDCARD. When scrolling vertically or horizontally it is possible to
continue beyond the last option to the first option.
Figure 39� Order of Service Mode Screens
FILL
3 Seconds
L2 PASSWORD
PASSWORD
MENU
FP ID
SDCARD
ACTIVE
POS
MENU
HOSE
PRICE
TIME
DATE
PASSWD
VR
REBOOT
CC
OS
MENU
MAPPING
FIRMWARE
FLOWCTRL
MENU
FLOWCTRL
TIMEOUT
MENU
TIMEOUT
MENU
STARTDEL
STARTDEL
MENU
Press FILL
to Confirm
LPG
MENU
LPG MENU
*
*
*
*
*
= Not always present
STK MENU
STACK
MENU
FIRMWARE
MENU
POS
MENU
CONFIG
CONFIG
MENU
ERRORS
MENU
ERRORS
TOTES
Version 1.20
