75
4. Operation of systems and equipment
Hazard warning lamp
When the ignition switch is in any position,
if you press the switch, the switch red
indicator lamp will flash and the hazard warning
lamp will be turned on. Press this switch again
to turn off the hazard warning lamp.
If the hazard warning lamp is turned on, all
turn signal lamps and the indicator lamps
and on the instrument cluster will flash
simultaneously.
The hazard warning lamp shall be turned
on in the following cases so as to attract the
attention of persons on the road and reduce
the risk of traffic accidents:
-
The vehicle is involved in any failure.
-
The vehicle is at the tail end of a traffic
jam.
-
The vehicle tows another vehicle or is
towed.
-
The vehicle is temporarily parked due to
poor visibility.
NOTE
● The use of the hazard warning lamp will
consume the battery power, so please
turn it off when not in use.
● Be sure to strictly abide by the relevant
regulations when using the hazard
warning lamp.
● In the event of an emergency, if the
hazard warning lamp is faulty, other
methods that comply with the relevant
traffic rules and regulations must be
taken to attract the attention of persons
on the road.
Vehicle assisted lighting
-
If you press the unlock button on the
remote control key within the effective
range, the position lamps will stay on for
25 s for the purpose of helping you to
approach your vehicle. If you press the
unlock button on the remote control key
again, the position lamps can stay on for
another 25 s. When the ignition switch is
switched to the “ON” position, the position
lamps will go out.
Vehicle locating lighting
-
If you press the lock button on the
remote control key twice within 0.5 s, the
position lamps will stay on for 8 s and
the turn signal lamps will flash 3 times for
the purpose of helping you to locate your
vehicle.
