72
4. Operation of systems and equipment
Daytime running lamp*
-
When the engine is started and the
position lamps are off, the daytime running
lamps can be automatically turned on;
when the position lamps are turned on
or the engine is shut down, the daytime
running lamps can be automatically turned
off.
NOTE
T h i s f u n c t i o n c a n b e a c t i v a t e d o r
deactivated by setting the “System Settings
→ Body Accessories → Exterior Lamp →
Daytime Running Lamp” of the AV system.
Position lamp
-
If you turn the lamplight switch to the
position, the position lamps, instrument
panel lamps, license plate lamps and
other lamps will be turned on, and the
corresponding indicator lamp
on the
instrument cluster will come on.
NOTE
If you forget to turn off the position lamps
when the ignition switch is switched to
the “OFF” position and the vehicle is not
locked, the position lamps will stay on for
15 min and then go out automatically in
order to save the battery power; when the
ignition switch is switched to the “OFF”
position and the vehicle is locked, the
position lamps will go out immediately.
WARNING
● When driving the vehicle at night or
on a road with poor visibility, please
do not only turn on the position
lamps. Otherwise, accidents may
easily occur.
● When temporarily parking the vehicle
at night or on a road with poor
visibility with the need of indicating
the position of the vehicle, do not
use the position lamps as the parking
lamps but be sure to turn on the
hazard warning lamp due to the
battery power saving function of the
position lamps.
