manualshive.com logo in svg

GAC MOTOR GS3, Manual, Page: 124 / 261

Share
Download
GAC MOTOR GS3 Manual Download Page 124

118

4. Operation of systems and equipment

Lyrics failed to load

Main interface

Back

Pause/ 

Playback

Cycle mode

Playlist

Previous track

Next track

Enter the USB media playback mode of the 

AVNT unit in the following ways:
- 

Click the “Music” card in the smart card 

area of the main interface to enter the 

music interface, then click “Local music”, 

and click “USB media playback”.

- 

Click the “Music” soft key in the 

application menu interface to enter the 

music interface, then click “Local music”, 

and click “USB media playback”.

- 

Press the MODE button on the left side of 

the steering wheel repeatedly to switch to 

the USB media playback mode.

   NOTE

●  The music interface has three functions: 

Music hall (Online music), Local 

music, My music; only “Local music” is 

introduced here.

●  The AV  system  supports  USB  flash 

drives with capacity of FAT 16/32.

Summary of Contents for GS3






































































































































































































































































Reviews:

No comments