131
5. Driving guide
Limp home mode*
When “No key detected” appears on the
instrument cluster display due to low battery of
the intelligent remote control key, you can try to
place the intelligent remote control key flatwise
in the front of the bottom inside the armrest
box, then set the ENGINE START/STOP
button to “ACC” or “ON” position or depress
the brake pedal, and after the ENGINE START/
STOP button indicator lamp turns green, press
the ENGINE START/STOP button to start the
engine.
This method is intended for emergency start.
Please replace the battery of the intelligent
remote control key as soon as possible.
Conventional ignition switch*
The ignition switch has 4 positions:
-
LOCK (OFF): in this position, circuits are
not connected; the key can be pulled out
only in this position.
-
ACC: The circuits of accessories such as
the 12V power supply are connected.
-
ON: in this position, the instrument cluster
backlight comes on, and the circuits of all
electrical consumers are connected; after
the engine is started, the ignition switch
will be switched to this position.
-
START: this position is only used to start
the engine.
NOTE
In case of failure to turn the key from
“LOCK” to “ACC”, the steering wheel may
be turned slightly to disengage the steering
wheel locking mechanism until the key
can be turned to switch the position of the
ignition switch.
