GAC MOTOR GS3 Manual Download Page 233

Page: 233 / 261

227

8. Accident handling

8.2 Use of warning triangle

Open the liftgate.

Lift up the trunk carpet.

Take out the warning triangle and unfold it

for use.

Placement distance

Ordinary highway

Expressway

Daytime

Night

≥ 50 m

≥ 80m

≥ 150m

CAUTION

The data above is for reference only.

Please place the warning triangle at the

distance specified by traffic regulations.

8.3 Use of reflective vest

If it is necessary to stop the vehicle due to

an accident or other failures, take out the

reflective vest from the glove box to put

on it well before getting off the vehicle for

checking and troubleshooting.

Summary of Contents for GS3






































































































































































































































































Search results

Summary of Contents for GS3

Reviews:

Related manuals for GS3

Brands by name

Popular brands

GAC MOTOR GS3, Manual

Search results

Summary of Contents for GS3

Reviews:

Related manuals for GS3

Brands by name

Popular brands