73
4. Operation of systems and equipment
Low beam
-
Turn the lamp switch to the
position
to turn on the low beam.
High beam
-
After turning on the low beam, if you push
the lamplight combination switch forward
to the limit position, the high beam will be
turned on and the corresponding indicator
lamp
on the instrument cluster will
come on.
-
If you pull the lamplight combination
switch backward to the original position,
the high beam will be turned off.
Headlamp flashing
-
If you pull the lamplight combination
switch backward to the limit position, the
high beam will be turned on.
-
If you release the switch, the lamplight
combination switch will automatically
return to its original position and the high
beam will be turned off.
NOTE
● The high beam may cause dazzling
to drivers of oncoming vehicles at
close range, which may easily cause
accidents. Therefore, please use the
high beam reasonably.
● When all the lamps are turned off, if you
pull and hold the lamplight combination
switch backward, the high beam will
stay on, and the corresponding indicator
lamp
on the instrument cluster will
come on.
Manual headlamp leveling
Rotate the knob
①
to manually level the
headlamp (low beam) at 0, 1, 2 and 3
positions. The level of the headlamp will
decrease as the adjustment value increases.
Position lamp on warning
When the ignition switch is turned to the
“OFF” position with the position lamps turned
on, if you open the driver’s door, the system
will send a buzzer sound and the instrument
cluster TFT display * will display the message
“Lamp On”.
