manualshive.com logo in svg

GAC MOTOR GS3, Manual

The Dräger GS3 is a cutting-edge device designed for safety and protection. Elevating user experience, it comes with comprehensive Instructions For Use that are essential for proper handling. For hassle-free accessibility, you can easily download the complete manual for free from our website manualshive.com.

Share
Download
background image

168

5. Driving guide

Distribution of RPA sensors

The RPA sensors are installed on the rear 

bumper cover.

   CAUTION

●  Always  keep  the  surface  of  the  RPA 

sensors clean and never cover a RPA 

sensor.

●  Keep the RPA sensors clean and protect 

them from freezing to ensure they 

operate properly.

●  Clean  the  RPA  sensor  surface  with 

a piece of soft damp cloth to avoid 

scratching.

   WARNING

●  The  RPA  cannot  take  the  place 

of the driver’s observation to the 

surrounding environment. The driver 

shall be concentrated and reverse 

safely according to the actual 

conditions.

●  The RPA sensors have blind spots 

while they are detecting obstacles. 

During reversing, the driver shall 

observe the surrounding environment 

carefully to avoid scratches or 

collisions.

●  When the vehicle is reversing at a 

narrow place or on an uphill slope, 

the RPA sensors may not detect 

railings, trees or slope surfaces, 

which is normal.

●  When the reversing speed is high, the 

detection accuracy of the RPA sensor 

reduces. Thus the reversing speed 

had better not to exceed 10km/h. 

When the RPA sends the continuous 

audible alarms, it indicates that the 

vehicle is extremely close to the 

detected obstacle, and reversing 

shall be stopped immediately to 

prevent an accident.

   WARNING

●  When  a  high-pressure  cleaner  is 

used, clean the RPA sensors in 

snatches gently, with the nozzle at 

least 30cm away from the sensor.

●  If water drops are on the surface of 

the RPA sensors on the rear bumper, 

the sensitivity of the sensors will 

reduce. Wiping off them can restore 

the sensitivity of the sensors.

●  The surface of some materials cannot 

reflect the signal from the RPA 

sensors, so that the RPA sensors 

cannot detect such materials or 

people wearing the clothing made of 

such materials.

●  Noise sources outside the vehicle 

may interfere with the RPA sensors, 

preventing them from detecting any 

object.

●  The  RPA  sensor  is  a  precision 

component, which shall not be 

removed, refitted and repaired 

without authorization. Otherwise, 

G A C   w i l l   n o t   a s s u m e   a n y 

responsibility for the damage arising 

therefrom.

Summary of Contents for GS3






































































































































































































































































Reviews:

No comments

Related manuals for GS3

Quadratec Brute Strength 12057.0271 Installation Manual preview
Brute Strength 12057.0271
Brand: Quadratec Pages: 6
hc-cargo 171850 Mounting And Operation Instructions preview
171850
Brand: hc-cargo Pages: 60
Whispbar K604W Fitting Instructions Manual preview
K604W
Brand: Whispbar Pages: 15
Flash Cover MN002 Installation Manual preview
MN002
Brand: Flash Cover Pages: 2
GMC 2010 Tahoe Owner'S Manual preview
2010 Tahoe
Brand: GMC Pages: 120
Prime Tech H-066 User Manual preview
H-066
Brand: Prime Tech Pages: 6
Volvo B13R Driver'S Handbook Manual preview
B13R
Brand: Volvo Pages: 24
E&G Classics 1398-0502-09 Instruction Manual preview
1398-0502-09
Brand: E&G Classics Pages: 2
Volvo XC70 - ANNEXE 808 Quick Manual preview
XC70 - ANNEXE 808
Brand: Volvo Pages: 8
Blue Ox BX1120 Installation Instructions preview
BX1120
Brand: Blue Ox Pages: 5
Tobe EPS-LD SafePark Technical Data preview
EPS-LD SafePark
Brand: Tobe Pages: 2
Feniex QUAD QSM-8101 Manual preview
QUAD QSM-8101
Brand: Feniex Pages: 4
Kargo Master 408TC Installation Manual preview
408TC
Brand: Kargo Master Pages: 14
Audiovox CDC-TO3 Installation Manual preview
CDC-TO3
Brand: Audiovox Pages: 2
LetsGoAero V2 Two-Bike Carrier User Manual preview
V2 Two-Bike Carrier
Brand: LetsGoAero Pages: 2
Black & Decker PIUSB2B Instruction Manual preview
PIUSB2B
Brand: Black & Decker Pages: 24
LG ARNU48GBRZ4 Installation Manual preview
ARNU48GBRZ4
Brand: LG Pages: 27
Bosch 7805 Fitting Instructions Manual preview
7805
Brand: Bosch Pages: 16

Brands by name

Popular brands

Load more brands