199
6. In-service maintenance
-
When installing the A/C filter, install it
according to the upward mark of the A/C
filter.
6.6 Replacing bulb
Instructions for replacing bulbs
When replacing bulbs, be careful not to touch
the bulb glass with fingers. Otherwise, the
heat of the bulb will evaporate the grease on
the bulb from fingerprints and condense it on
the bulb glass, reducing the illuminance of the
lamp.
After replacing bulbs, be sure to check the
operating status of lamps, and go to the GAC
Motor authorized shop to check the beam
status in time.
NOTE
● Lamps for the vehicle include halogen
and LED types. If the halogen bulb is
damaged, please go to the GAC Motor
authorized shop for replacement.
● The removing and installing methods
of the left and right bulbs are basically
the same. Here only the removing and
installing methods of halogen bulbs on
one side are described.
CAUTION
Damaged bulbs must be renewed with the
bulbs of the same specifications; for the
specific specifications
WARNING
If you are unfamiliar with the operation
process, safe operation specifications
and tool operation methods, do not
replace bulbs yourself.
● Turn off all lamps before replacing
bulbs, and wait for bulbs till they are
cool before replacement.
● Pay attention to the sharp parts
on the combination lamp housing
in the engine compartment during
operation, and be careful not to
scratch hands while replacing bulbs.
