manualshive.com logo in svg

GAC MOTOR GS3, Manual

The Dräger GS3 is a cutting-edge device designed for safety and protection. Elevating user experience, it comes with comprehensive Instructions For Use that are essential for proper handling. For hassle-free accessibility, you can easily download the complete manual for free from our website manualshive.com.

Share
Download
background image

17

3. Instructions for safe operation

Fastening the front seat belt

- 

Keep a correct sitting posture. 

=> See 

page 13

- 

Pull out the seat belt slowly at a uniform 

speed, insert the lock tongue into the 

corresponding buckle until a click sound is 

heard.

- 

Pull the seat belt and confirm that the lock 

tongue is properly locked.

   NOTE

All seat belts are fastened in the same way, 

and the driver is responsible for reminding 

passengers to fasten the seat belts 

correctly.

Unfastening the seat belt

- 

Press the red button of the buckle. Then 

the lock tongue will pop out automatically.

- 

Grasp the seat belt to allow it to retract 

slowly.

Pregnant women must fasten the seat belts 

correctly

How should a pregnant woman fasten the seat 

belt?
- 

Adjust the seat and head restraint to the 

proper position.

- 

Grasp the lock tongue, slowly pull the seat 

belt over the shoulder, and ensure that 

the lap belt is as low as possible and not 

pressed against the abdomen.

- 

Insert the lock tongue into the corresponding 

buckle until a buckling sound is heard.

- 

Pull the shoulder belt upward parallel to 

the upper body, tension the lap belt, and 

make sure that the lock tongue is properly 

locked.

Summary of Contents for GS3






































































































































































































































































Reviews:

No comments

Related manuals for GS3

Vauxhall Cascada Quick Reference Manual preview
Cascada
Brand: Vauxhall Pages: 2
TATA Motors Safari Owner'S Manual & Service Book preview
Safari
Brand: TATA Motors Pages: 161
TAUBENREUTHER 16 - 590 Fitting Instructions Manual preview
16 - 590
Brand: TAUBENREUTHER Pages: 11
Yakima SKYBOX Series Manual preview
SKYBOX Series
Brand: Yakima Pages: 15
Yakima K1188 Instructions Manual preview
K1188
Brand: Yakima Pages: 12
JEHNERT SOUND DESIGN 65400 Assembly Instruction Manual preview
65400
Brand: JEHNERT SOUND DESIGN Pages: 8
Rainbow Experience Series Installation Manual preview
Experience Series
Brand: Rainbow Pages: 19
Yakima K1006 Instructions Manual preview
K1006
Brand: Yakima Pages: 12
GMC SIERRA 2019 Getting To Know Your preview
SIERRA 2019
Brand: GMC Pages: 20
APEXi V-AFC II Instruction Manual preview
V-AFC II
Brand: APEXi Pages: 18
Prorack K519 Fitting Instructions For Basic Carrier preview
K519
Brand: Prorack Pages: 15
IBASE Technology MPT-3000V User Manual preview
MPT-3000V
Brand: IBASE Technology Pages: 100
Modifry Products S2000 Windscreen Camera Mount Quick Start Manual preview
S2000 Windscreen Camera Mount
Brand: Modifry Products Pages: 2
Oldsmobile 2000 Oldsmobile Intrigue Owner'S Manual preview
2000 Oldsmobile Intrigue
Brand: Oldsmobile Pages: 348
Cadillac GMC Yukon Denali 2005 Owner'S Manual preview
GMC Yukon Denali 2005
Brand: Cadillac Pages: 456
Saab 900 5 Speed Technical Training Manual preview
900 5 Speed
Brand: Saab Pages: 63
R&G LP0291BK Fitting Instructions Manual preview
LP0291BK
Brand: R&G Pages: 20
Whispbar S17W Fitting Instructions Manual preview
S17W
Brand: Whispbar Pages: 70

Brands by name

Popular brands

Load more brands