40
4. Operation of systems and equipment
Tachometer
The tachometer is used to indicate the current
engine speed, in 1,000 r/min.
NOTE
7000~8000 r/min is the high load area of
the engine, which shall never be reached
for fear of engine damage.
Instrument cluster display
Displayed information (TFT display): door open
indication, gear display*, mileage indication,
driving information, menu settings, warning
information.
Displayed information (segment display):
outside temperature, door open indication,
gear display*, mileage indication.
CAUTION
If the instrument cluster display is
abnormal, stop the vehicle immediately for
the sake of safety, and contact the GAC
Motor authorized shop for inspection.
Speedometer
The speedometer displays the current speed
of the vehicle in km/h.
CAUTION
● For driving safety, please strictly abide
by the traffic rules, and do not speed the
vehicle at will.
Fuel gauge
The fuel gauge is used to indicate the current
amount of fuel remaining in the fuel tank.
-
The indication range is E~F, where “E”
means the fuel tank is empty, and “F”
means the fuel tank is full.
-
The corresponding scale divisions will
be illuminated according to the amount
of remaining fuel in the fuel tank. When
no scale division or only the first scale
division is illuminated, it means that the
fuel in the fuel tank is insufficient, and
the indicator lamp on the instrument
cluster will flash in yellow, accompanied
by an alarm message.
Engine coolant temperature gauge
The engine coolant temperature gauge is
used to indicate the current temperature of the
engine coolant.
-
The indication range covers C~H, where,
“C” means low temperature and “H”
means high temperature.
After the engine is started, the corresponding
scale divisions of the coolant temperature
gauge will be illuminated according to different
temperatures, and the engine operating
temperature will vary depending on the ambient
temperature and engine load.Driving mode*
-
Conditions where the gauge indicates
high coolant temperature: prolonged
climbing in hot weather; deceleration
or stop after driving at a high speed; in
areas with heavy traffic, where the HVAC
system is turned on and the engine idles
for a long time; towing, etc
-
Conditions where the gauge indicates low
coolant temperature: insufficient warm-
up after cold start in cold weather; running
with maximum heating in cold weather,
etc.
Driving mode*
-
The current driving mode of the vehicle
is displayed according to the received
signal.
.
