GAC MOTOR GS3 Manual Download Page 190

Page: 190 / 261

184

6. In-service maintenance

6.4 Inspecting and adding

fluids

6.4.1 Fuel

As the amount of fuel decreases when the

vehicle is running, the fuel gauge scale will

gradually decrease.

=> See page

When the fuel level is too low, the yellow

indicator lamp

flashes, and the instrument

cluster will give an alarm message. At this

time, fuel shall be added as soon as possible.

Adding fuel

Pull up the fuel tank cap release handle to

make the fuel tank cap pop up.

Open the fuel tank cap, and slowly

unscrew the filler cap counterclockwise.

Keep the filter cap at the original place for

a while when it is unscrewed completely

to allow fuel tank to release the fuel vapor

inside, and then remove it.

Summary of Contents for GS3






































































































































































































































































Search results

Summary of Contents for GS3

Reviews:

Related manuals for GS3

Brands by name

Popular brands

GAC MOTOR GS3, Manual

Search results

Summary of Contents for GS3

Reviews:

Related manuals for GS3

Brands by name

Popular brands