manualshive.com logo in svg

GAC MOTOR GS3, Manual

The Dräger GS3 is a cutting-edge device designed for safety and protection. Elevating user experience, it comes with comprehensive Instructions For Use that are essential for proper handling. For hassle-free accessibility, you can easily download the complete manual for free from our website manualshive.com.

Share
Download
background image

140

5. Driving guide

Brake booster

The brake booster is used to increase the 

pressure applied by the driver on the brake 

pedal, and it only works when the engine is 

running.
If the brake booster does not work properly 

due to a fault, or when the vehicle is towed, the 

force on the brake pedal must be increased 

to compensate for the assist power loss of the 

brake booster.

   WARNING

●  Never make the vehicle coast with 

the engine shut down, because at 

this moment, the brake booster does 

not work, the braking distance will be 

greatly increased, and an accident is 

likely to be caused.

Braking effect and braking distance

The braking effect and braking distance mainly 

depend on the driving environment, road 

conditions and driving style,
With worn brake linings, the vehicle cannot 

be braked effectively. The wear rate of 

brake linings mainly depends on the vehicle 

operation conditions and driving style. If the 

vehicle often runs in urban areas or for short 

distances, it is recommended to check the 

brake lining thickness more frequently based 

on the maintenance cycle specified in the 

Warranty Manual

.

After wading, heavy rain or vehicle washing, 

brake linings may get wet or icy (in winter), 

resulting in a reduction in braking effects. 

In this case, the brake pedal must be lightly 

depressed to heat the brake by friction and 

evaporate the moisture to restore braking 

effects.

   WARNING

A new tire and brake lining having 

not undergone running-in do not 

have the best adhesion and friction 

characteristics.

●  New tires do not yet have the best 

adhesion, so please drive carefully for 

the first 500km to avoid accidents!

●  New brake linings in the first 200km 

to 300km driving distance do not get 

the best friction characteristics, and 

braking effects are not as good as 

expected, so new brake linings must 

be subject to running-in. Braking 

effects can be compensated by 

increasing the force applied to the 

brake pedal. New brake linings must 

also be subject to running-in.

●  When driving, do not get too close to 

other vehicles or bring the vehicle to a 

situation where emergency braking is 

necessary. Take care especially when 

driving with a new tire and new brake 

lining having not undergone running-

in, for fear of accidents!

Summary of Contents for GS3






































































































































































































































































Reviews:

No comments

Related manuals for GS3

Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
BMW E39/2 Installation Instructions Manual preview
E39/2
Brand: BMW Pages: 21
Ford 2001 Explorer Owner'S Manual preview
2001 Explorer
Brand: Ford Pages: 256
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
Oypla Leisure 4269 User Manual preview
4269
Brand: Oypla Leisure Pages: 4
Broadfeet RSLX-385-68S Installation Instructions preview
RSLX-385-68S
Brand: Broadfeet Pages: 2
Xingyun XY40EV Service Manual preview
XY40EV
Brand: Xingyun Pages: 74
Yakima Landing Pad 11 Manual preview
Landing Pad 11
Brand: Yakima Pages: 28
Hama 00173884 Operating Instructions Manual preview
00173884
Brand: Hama Pages: 13
Pet Gear TL9000 Instruction Manual preview
TL9000
Brand: Pet Gear Pages: 4
Suzuki IGNIS 2022 Series Manual preview
IGNIS 2022 Series
Brand: Suzuki Pages: 570
Chevrolet 1995 C/K Pickup Owner'S Manual preview
1995 C/K Pickup
Brand: Chevrolet Pages: 483
HOLDEN Malibu EM 2015 Owner'S Handbook Manual preview
Malibu EM 2015
Brand: HOLDEN Pages: 330
Easee Base 1-Way User Manual / Installation Manual preview
Base 1-Way
Brand: Easee Pages: 21
Revelation lnd-10716 Installation Instructions preview
lnd-10716
Brand: Revelation Pages: 4
Mazda 2011 CX-9 Owner'S Manual preview
2011 CX-9
Brand: Mazda Pages: 605
Panavise Indash 75114-296 Installation Instructions preview
Indash 75114-296
Brand: Panavise Pages: 2

Brands by name

Popular brands

Load more brands