200
6. In-service maintenance
Preparation for replacing bulbs
If it is found that any bulb is damaged,
replace the bulb as soon as possible. Before
replacement, make the following preparations:
1. Turn off all lamps.
2. Set the ignition switch to the “OFF”
position.
3. Check whether the related fuse is blown.
When the fuse is in good conditions,
perform bulb inspection and replacement.
Replacing high/low beam bulb
1. Pull out the high/low beam blanking piece
①
.
2. Screw out the high/low beam bulb
①
counterclockwise.
3. Disconnect the connector as arrowed.
4. Take out the high/low beam bulb
①
.
5. Replace the original high/low beam bulb
with a new one in the reverse order.
