manualshive.com logo in svg

FUTABA CGY755, Manual

The FUTABA CGY755 is an advanced control system for remote-controlled models. This comprehensive Manual provides detailed instructions on installation, programming, and configuration. It is available for free download from our website, where you can easily access it to enhance your model's performance and maximize your flying experience.

Share
Download
background image

4

T

ABLE OF 

C

ONTENTS 

• Introduction -------------------------------------------------------------------------------------- 2

• Warranty and Repair Service (in U.S.A.) -------------------------------------------------- 5

• Features ------------------------------------------------------------------------------------------- 6

• Applicable Systems------------------------------------------------------------------------------ 7

• Contents ------------------------------------------------------------------------------------------- 8 

• Replacement and Optional Items -----------------------------------------------------------10

• Precautions -------------------------------------------------------------------------------------- 11

• Mounting / Part name / Connecting --------------------------------------------------------17

Mounting the CGY(CGY760R/CGY755)  ------------------------------------------------------ 18
Link Method With Transmitter (FASSTest / T-FHSS) --------------------------------------- 21
Connecting The CGY ------------------------------------------------------------------------------- 22

S.BUS Channel Setting ----------------------------------------------------------------------------- 24
Governor Installation ------------------------------------------------------------------------------- 24

• First Map ----------------------------------------------------------------------------------------28

• Home Screen ------------------------------------------------------------------------------------30

• GPB-1 Screen -----------------------------------------------------------------------------------33

• BASIC MENU ----------------------------------------------------------------------------------39

• SBUS BASIC MENU (S.BUS Basic Setting) ----------------------------------------------40

• SWH. BASIC MENU (Swash Basic Setting) ---------------------------------------------45

• FLT. TUNE MENU (Flight Tuning Setting) ----------------------------------------------53

• RUD. BASIC MENU (Rudder Gyro Basic Setting) -------------------------------------57

• GOV. BASIC MENU (Governor Basic Setting) ------------------------------------------61

Governor Speed Setting ---------------------------------------------------------------------------- 68
Governor Operation -------------------------------------------------------------------------------- 68

• Recommended Gyro Gain Setting ----------------------------------------------------------69

• Adjustments During The Test Flight -------------------------------------------------------69

• Tips Using The Governor With Electric Models -----------------------------------------71

• TRANSMITTER Rotor head Gyro GAIN SET-UP -------------------------------------72

• EXPERT MENU -------------------------------------------------------------------------------73

• RUD. EXPERT MENU (Rudder Gyro Expert Setting) --------------------------------74

• FLT. EXPERT MENU (Cyclic Gyro Expert Setting) -----------------------------------78

• SWH. DETAIL MENU (Swash Detail Setting) -------------------------------------------81

• GOV. EXPERT MENU (Governor Expert Setting) -------------------------------------88

• WRITE Screen ----------------------------------------------------------------------------------92

• S.BUS SERVO SETTING Screen -----------------------------------------------------------93

• VIA TRAINER FUNCTION --------------------------------------------------------------- 104

• 3D VIA TRAINER Screen FUNCTION LIST ----------------------------------------- 105

• GPB-1 SOFTWARE UPDATE ------------------------------------------------------------ 106

• MOUNTING OF CGY760R/CGY755 WITH SCREWS ------------------------------110

• Specifications

 -----------------------------------------------------------------------------------111

Summary of Contents for CGY755

















































































































Reviews:

No comments

Related manuals for CGY755

Waters 2690 Quick Start Manual preview
2690
Brand: Waters Pages: 55
Paradox IP150 Programming Manual preview
IP150
Brand: Paradox Pages: 2
GANTERUD L3 User Manual preview
L3
Brand: GANTERUD Pages: 24
C-Nav C-NaviGator III Reference Manual preview
C-NaviGator III
Brand: C-Nav Pages: 20
Cabletron Systems SmartSwitch 6000 Installation & User Manual preview
SmartSwitch 6000
Brand: Cabletron Systems Pages: 76
Harpo BraillePen 12 Quick Start Manual preview
BraillePen 12
Brand: Harpo Pages: 35
Hardi HC 6500 Quick Manual preview
HC 6500
Brand: Hardi Pages: 2
Newport MM4005 User Manual preview
MM4005
Brand: Newport Pages: 417
Casambi RP GROUP Mounting Instructions preview
RP GROUP
Brand: Casambi Pages: 2
GI.BI.DI AS05582 Installation Instructions Manual preview
AS05582
Brand: GI.BI.DI Pages: 60
Tormatic DuoControl Signal 111 Quick Start Manual preview
DuoControl Signal 111
Brand: Tormatic Pages: 3
Reliance Foundry R-7651-EM Installation preview
R-7651-EM
Brand: Reliance Foundry Pages: 3
Wesa AE04 Installation And Operation Manual preview
AE04
Brand: Wesa Pages: 8
SILENTRON SERENYA 2000 Manual preview
SERENYA 2000
Brand: SILENTRON Pages: 20
MacroAir Technologies Controller 30 Operation Manual preview
Controller 30
Brand: MacroAir Technologies Pages: 32
Waterbird ITSC1000 User Manual preview
ITSC1000
Brand: Waterbird Pages: 19
MOBA MOBA-Matic MMC-1000 User Manual preview
MOBA-Matic MMC-1000
Brand: MOBA Pages: 172
Vimar Elvox R854 Installer'S Manual preview
Elvox R854
Brand: Vimar Pages: 8

Brands by name

Popular brands

Load more brands