36
RECEIVER (Receiver system setting)
On the
"
RECEIVER
"
screen, make sure that the CGY760R/CGY755 setting
matches the protocol that is selected/utilized in the transmitter.
"
RECEIVER
"
screen from the GPB-1 menu screen
.
(1) RECEIVER
Set the same system as the transmitter to be linked.
Move the cursor to the system such as "FASSTest"
with the [ /+] or [ /-] key and press the [Enter] key
to enter the setting mode. Then select the system
with the [ /+] or [ /-] key. Since "EXECUTE: Enter
(1 sec)" is displayed. Pressing the [Enter] key for
about 1 second changes the selected system and
exits the setting mode.
After changing the commu-
nication mode, link with the transmitter.
Setting: FASSTest- / T-FHSS
(2) Internal Rx
It is a setting to turn on / off the function of the internal
receiver. In the same way as in "Receiver System",
set ACT / INH of "Internal Rx" by pressing the [Enter]
key for about 1 second. When "Internal Rx" setting is
INH, (1) communication mode is not displayed.
Setting: ACT/ INH
With "INH" setting the receiv-
er system will not display.
RECEIVER screen
Note:
To change the "Receiver System" type, first power off the transmitter and receiver, and
re-power the CGY760R/CGY755 while the transmitter is still in the OFF position. The only
way to change the receiver type is by power cycling the gyro first.
CAUTION
Please turn off the power when connecting the receiver.
If the power is on and connected, the CGY or the receiver may be damaged.
WARNING
If you do not turn off the power after changing "Internal Rx" setting
to INH, the internal receiver is in operation. After changing the setting,
please power cycle. If the power is not cycled, the receiver will not
keep bind and the helicopter will crash.
For CGY760R
*Ignore this display for
CGY755.
Summary of Contents for CGY755
Page 112: ......
