13
ing a regulator you must ensure that the regulator is capable of sup-
plying the current demands of the equipment you have selected. In
addition to this make sure the wiring and switch you have selected are
capable of handling high current draws.
*The servo current draw can be up to 50% higher on a flybarless helicopter. Always
ensure your receiver battery is fully charged before each flight.
ABOUT CONNECTOR:
Insert the connector such as sensor, servo, connection cable, bat-
tery etc., surely.
*If it is not securely inserted all the way in, it may come off due to vibration during flight
and there is a danger of falling.
ABOUT WIRING:
Please secure the wiring so that it does not rub against the helicop-
ter frame or other such items that could cause wear. If it does so, we
suggest covering these ares with fuel tubing (or similar) to prevent
damage.
ABOUT VIBRATION ISOLATION AND WATERPROOFING:
The CGY760R/CGY755 is fixed with a dedicated mounting pad with
good condition and the helicopter performs sufficient anti-vibration
measures so as not to receive strong vibration at the time of flight.
Also, if there is a risk of the gyro getting wet, place it in a plastic bag
and take waterproof measures.
ON FLIGHT PRECAUTION:
Always exit programming mode before attempting to fly the model.
Gyro operating precautions:
Gyro
The CGY760R/CGY755 requires 5-10 seconds to initialize when the
power is turned on. Do not move the helicopter and do not move the
tail rotor, aileron and elevator sticks during this initialization or the
gyro may not initialize properly. Once the initialization process has
been completed the swash servos and tail servo will move several
times indicating that the CGY760R/CGY755 is now ready for flight.
Summary of Contents for CGY755
Page 112: ......