50
Cond
From 3/5
Go to 5/5 from any
cursor position
(9) PIT. Rate: Rate adjustment
The [PIT.Rate] is the amount of collective pitch travel allowed. A good
starting range for Sport, 3D and F3C is +/-10 to +/-12 degrees. Use
the [ /+] or [ /-] key to make an adjustment.
Setting ranges: 0 ~ 100 Initial value: 50%
(10) SWS. Ring
This parameter is used to set the total maximum of
cyclic throw as well as limit the swash travel to prevent
binding of the swash plate servos when the control stick
is moved toward a corner (for example, full right and full
aft cyclic). Press the [ /+] or [ /-] key to adjust the value.
Setting ranges: 50 ~ 100% Initial value: 130%
(11) AGy. Dir: Aileron (roll) Gyro direction
EGy. Dir: Elevator (pitch) Gyro direction
This parameter controls which direction the CGY (roll
/ pitch axis) will compensate when the helicopter rolls
(pitches). Pick the helicopter up and roll the helicopter
to the right. The CGY should compensate by adding
left cyclic to the swash plate. (Pick the helicopter up
and rotate the nose of the helicopter downward. The
CGY should compensate by adding aft cyclic to the
swash plate.)
If the CGY compensates in the wrong direction, then it
will be necessary to reverse the compensation direc-
tion setting by pressing the [ /+] or [ /-] key once.
SWH. BASIC screen 4/5
WARNING
Verify that the CGY compensates in the correct direction before
flight. If the compensation direction is incorrect the model will roll
or pitch uncontrollably even before it leaves the ground.
Summary of Contents for CGY755
Page 112: ......
