84
SWH. DETAIL screen 4/7
From 3/7
Go to 5/7 from any cursor position
(10) AIL High / AIL Low: Linkage compensation aileron
At HIGH pitch and LOW pitch check to make sure that the swash plate
is staying level on the elevator and collective axis when using aileron
inputs. If the swash plate is rising or falling, use the [ /+] or [ /-] key to
maintain the swash plate position the same as that noted in the centered
aileron inputs.
Note
: check all four directions: high/right; high/left; low/
right; low/left
Setting ranges: 0 ~ 100% Initial value: 0%
(11) AIL Dir: Compensation direction of the aileron
If the above Data (+/-) correction from 0-100 is NOT in the correct com-
pensation direction, change the value from [+] or [-] using the [ /+] or [
/-] key.
Setting: +/- Initial setting: +
Summary of Contents for CGY755
Page 112: ......
