7
WARNING
Do not use inappropriate input voltage. Doing so may cause fire,
electrical shock or malfunction.
Do not insert or drop any metal or any flammable material into the
main body through any aperture. Doing so may cause fire,
electrical shock or malfunction.
Avoid direct skin contact with the heating portion. This may cause
burn or injury. Warning symbol is placed on the lid of the
protection sleeve heater for notification.
Do not remove the panels of the fusion splicer. Some parts
generate high voltage. Removing the panels may cause electrical
shock.
If abnormal sounds or extra high temperatures are observed, turn
off the power, disconnect the power cord, remove the battery from
the fusion splicer, and contact Furukawa Electric Co., Ltd. or your
local representative. Continuing to operate under these conditions
may cause fire or electrical shock.
Do not use a damaged power cord where the inner cable is exposed
or severed. Doing so may cause fire or electrical shock.
If water is spilled into the fusion splicer, turn off the power switch,
disconnect the power cord, remove the battery, and contact
Furukawa Electric Co., Ltd. or your local representative. Continuing
to operate under these conditions may cause fire or electrical
shock.
If smoke or strange smells are observed, turn off the power switch,
disconnect the power cord, remove the battery, and contact
Furukawa Electric Co., Ltd. or your local representative. Continuing
to operate under these conditions may cause fire, electrical shock
or malfunction.
If the fusion splicer is dropped and damaged, turn off the power
switch, disconnect the power cable, remove the battery, and
contact Furukawa Electric Co., Ltd. or your local representative.
Continuing to operate may cause fire or electrical shock.